LED Flashing
When LED Flashing is On, the LEDs and aiming light alternately flash until a symbol is decoded or the trigger is released.
If LED Flashing is turned Off, the average current draw is increased and the aiming light won’t illuminate while the scanner reads a bar code. The LEDs remain on while the scanner is reading.
Off | * On |
Aimer Delay
The aimer delay allows a delay time for the operator to aim the scanner before the picture is taken. Use these codes to set the time between when the trigger is pulled and when the picture is taken. During the delay time, the aiming light will appear, but the LEDs won’t turn on until the delay time is over.
200 milliseconds | 400 milliseconds |
*Off (no delay)
2 - 18
