Avaya P332G-ML manual Set Commands Summary Table, Set interface

Chapter 5 CLI – Layer 2

Example:

P330-N# clear port mirror 1/2/1/4

this command will delete the port mirror entry - do you want to continue (Y/N)? y

Mirroring packets from port 1/2 to port 1/4 is cleared

Set Commands Summary Table

Following is a Table of the Privileged Level set commands.

•	set logout	Set the number of minutes before an	Page 85
		inactive CLI session automatically logs
		out
•	set timezone	Set the timezone for the system	Page 85
•	set time server	Set the NTP server address	Page 86
•	set time protocol	Set the time protocol for use in the	Page 86
		system
•	set time client	Enables or disables the time client	Page 86
•	set ip route	Add IP addresses to the IP routing table	Page 87
•	set snmp community	Set the snmp community string for a	Page 88
		specific module
•	set snmp trap	Set the SNMP trap of the system or add/	Page 88
		delete an entry into/from the SNMP
		trap receiver table
• set snmp trap auth		Enable/Disable the SNMP	Page 89
		authentication trap
•	set snmp retries	Set the number of SNMP retries	Page 89
•	set snmp timeout	Set the SNMP timeout	Page 89
•	set system location	Set the system location	Page 90
•	set system name	Set the system name	Page 90
•	set system contact	Set the system contact person	Page 90
•	set device-mode	Set the basic mode of operation	Page 91
•	set interface	Configure the management interface of	Page 91
		the device

82 P332G-ML User’s Guide