
Chapter 5 | CLI – Layer 2 |
|
|
etc.
Note: Port security for the
Show internal buffering Command
This shows the size options (Maximum, Minimum, or Medium) of the Receive (Rx) buffer allocated to each port of the specified module.
The syntax for this command is:
show internal buffering [<mod_num>]
Example:
Module Internal Buffer
1 med
Note: This command is not supported
Show boot bank Command
Use the show boot bank command to display the software bank from which the module will boot at the next boot process. This command should be issued separately for each module in the stack using the session command.
Note: This command is not supported by the P333R and
The syntax for this command is:
show boot bank
Example:
Boot bank set to
57 |