
Chapter 6 | CLI – Layer 3 |
|
|
Example:
Showing | 1 rows |
|
|
|
|
Address |
| MAC Address | I/F | Type | TTL |
149.49.70.68 | 00:10:a4:98:97:e0 | Dynamic | 14355 |
show ip interface Command
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]<ip-address><vlan>]
The name of the interface whose information you | |
| want to display. |
The IP address of the interface whose information | |
| you want to display. |
vlan | The name or ID of the VLAN over which there are |
| interfaces you want to display. |
Output Example:
Showing 2 Interfaces
mgmt is administratively up On vlan Default
Internet address is 10.49.54.14 , subnet mask is 255.255.255.0 Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled Proxy ARP is disabled
baba is administratively down |
|
On vlan v2 |
|
Internet address is 192.168.0.14 | , subnet mask is 255.255.0.0 |
Broadcast address is 192.168.255.255 |
|
Directed broadcast forwarding is disabled
Proxy ARP is disabled
142 |