| Chapter 5 | CLI – Layer 2 |
|
| |
Show Port Output Fields |
| |
Field | Description |
|
Port | Module and port number |
|
Name | The name you assigned to the port |
|
Status | Status of the port (connected, no link, disabled, no Rmt Lnk) | |
VLAN | VLAN ID of the port |
|
Level | Priority level of the port |
|
Neg | The autonegotiation status of the port (enable, disable) | |
Duplex | Duplex setting for the port (fdx, hdx) |
|
Speed | Speed setting for the port (10, 100) |
|
Type | Port type, for example, 100BaseT, 1000BaseT, 1000BaseS | |
Show port trap Command
Use the show port trap command to display information on SNMP generic link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
Example:
P330-N> show port trap 1/1
Port 1/1 up/down trap is disabled
Show port channel Command
Use the show port channel command to display Link Aggregation Group (LAG) information for a specific module or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]]
53 |
