Chapter 5 | CLI – Layer 2 |
|
|
Note: MACs associated with LAGs appear under the LAG ID, not under the LAG port.
The syntax for this command is:
show cam [<mod_num>[/<port_num>]]
Example:
P330-N> show cam 1/1
Dest MAC/Route Dest | Destination Ports |
1/1 | |
1/1 | |
1/1 | |
etc... |
|
Show cascading fault-monitoring Command
Use the show cascading
The syntax for this command is:
show cascading fault-monitoring [<mod_num>]
Example:
Module 1
Module 1
Show port
The show
The syntax for this command is:
show port
[module/port] | module/port number |
60 |
