Avaya P332G-ML Entering the Supervisor Level, Entering the CLI, Entering the Technician Level

Chapter 4 CLI – Architecture, Access & Conventions

Entering the Supervisor Level

The Supervisor level is the level in which you first enter the CLI and establish user names for up to 10 local users. When you enter the Supervisor level, you are asked for a Login name. Type root as the Login name and the default password root (in lowercase letters):

Welcome to P330

Login: root

Password:****

Password accepted.

P330-N(super)#

Defining new users

Define new users and access levels using the username command in Supervisor Level. (see page 116).

Exiting the Supervisor Level

To exit the Supervisor level, type the command exit.

Entering the CLI

To enter the CLI, enter your username and password. Your access level is indicated in the prompt as follows:

The User level prompt is shown below:

P330-N>

The Privileged level prompt is shown below:

P330-N#

The Configure level prompt for Layer 3 configuration is shown below:

P330-N(configure)#

The Supervisor level prompt is shown below:

P330-N(super)#

Entering the Technician Level

This level can only be accessed from the Privileged and Supervisor levels and not from the User level.

This feature is not documented and is for use by Avaya Technical Support only.

P332G-ML User’s Guide 221