Avaya P332G-ML manual Set time protocol Command, Set time server Command, Set time server ip

Chapter 5 CLI – Layer 2

The minutes parameter can only be set to 30.

The syntax for this command is:

set timezone <zone_name> <hours hours:min>[:30]

Example:

set timezone GMT -3:30

Timezone set to 'GMT', offset from UTC is -3:30 hours

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

Set time protocol Command

Use the set time protocol command to set the protocol for use in the system as either SNTP protocol or TIME protocol.

The syntax for this command is:
set time protocol	[sntp-protocoltime-protocol]
Example:
P330-N# set time	protocol	sntp-protocol
The protocol has	been set	to SNTP protocol

P330-N# set time protocol time-protocol

The protocol has been set to TIME protocol

Set time server Command

The set time server command is used to set the TIME server address.

The syntax for this command is:

set time server <ip>

ip IP address of the TIME server.

Set time client Command

The set time client command is used to enable or disable the periodic network time acquisition by the switch from the network time server (SNTP or

86 P332G-ML User’s Guide