Avaya P332G-ML manual Port Send Flowcontrol Admin, Show cam Command

Chapter 5 CLI – Layer 2

Example:
P330-N> show port flowcontrol			3/2
Port	Send-Flowcontrol	Receive-Flowcontrol
	Admin Oper	Admin	Oper
------	----- ----	-----	----
3/2	off off	off	off

Output Fields

Field

Port

Send-

Flowcontrol-

Admin

Description

Module and port number

Send flow-control administration. Possible settings:

•ON indicates that the local port is allowed to send flow control frames to the far end.

•OFF indicates that the local port is not allowed to send flow control frames to the far end.

Send-

Flowcontrol-

Oper

Receive-

Flowcontrol-

Admin

Send flow-control operation mode. Possible modes:

•ON indicates that the local port will send flow control frames to the far end.

•OFF indicates that the local port will not send flow control frames to the far end.

Receive flow-control administration. Possible settings:

•ON indicates that the local port will act upon flow control indications if received from the far end.

•OFF indicates that the local port will discard flow control frames if received from the far end.

Receive-

Flowcontrol-

Oper

Show cam Command

Receive flow-control operation mode. Possible modes:

•ON indicates that the local port will act upon flow control indications received from the far end.

•OFF indicates that the local port will discard flow control frames received from the far end.

Use the show cam commands to display the CAM table entries for a specific port.

P332G-ML User’s Guide 59