Avaya P332G-ML Set boot bank value, P330-1super# set boot bank bank-a Boot bank set to bank-a

Chapter 5 CLI – Layer 2

Note: This command is not supported by the P333R and P333R-LB switches.

The syntax for this command is:

set boot bank <value>

value {bank-a bank-b}

Example:

P330-1(super)# set boot bank bank-a

Boot bank set to bank-a

Set intermodule port redundancy Command

Use the set intermodule port redundancy command to define or delete the stack’s unique intermodule redundancy scheme. The defined scheme can be enabled or disabled using the reversed set port spantree enable/disable command.

The syntax for this command is:

set intermodule port redundancy <module/prim-port> <module/

second-port> {on [<name>]}

<module/prim-port>	The primary port number
<module/second-port>	The secondary port number
{on}	Set the intermodule redundancy
[<name>]	The name of the fast redundancy (default is 'fast')

Example:

P330-N> set intermodule port redundancy 1/7 2/12 on backbone

backbone: port 2/12 is intermodule redundant to port 1/7

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

P332G-ML User’s Guide 101