Avaya P332G-ML Ip rip send-receivemodedefault route metric, Talkdefault-listen Set RIP to receive

Chapter 6 CLI – Layer 3

ip rip send-receive Command

Use the ip rip send-receivecommand to set the RIP Send and Receive mode on an interface. The default state is talk-listen.

The syntax for this command is:

ip rip send-receive<mode>[<default route metric>]

mode	talk-listen - Set RIP to receive and transmit
	updates on the interface.
	talkdefault-listen - Set RIP to receive
	updates on the interface and send only a default
	route.
default route metric	Integer value

Example:

To set the RIP Send and Receive mode on the interface “marketing” to be listen-only:

Router-N(config-if:marketing)# ip rip send-receive talk listen

ip rip default-route-mode Command

Use the ip rip default-route-modecommand to enable learning of the default route received by the RIP protocol. The default state is talk-listen.

The syntax for this command is:

ip rip default-route-mode <mode>

The possible default route modes on an interface are:

talk-listen	Set RIP to send and receive default route updates on
	the interface.
talk-only	Set RIP to send but not receive default route updates
	on the interface.

160 P332G-ML User’s Guide