Chapter 6 | CLI – Layer 3 |
|
|
ping Command
Use the ping command to check host reachability and network connectivity.
The syntax for this command is:
ping <host> [<packetsize> [<interval>]]
host | IP address of the target system. |
packetsize | An integer, the size of the packet sent during a ping |
| operation. The default is 56 bytes. |
interval | An integer, the number of seconds between |
| successive ping messages. The default is 1 second. |
Example:
Router-N> ping 149.49.50.13 5 8
Example:
Router-N> ping 149.49.50.13
traceroute Command
Use the traceroute command as a trace route utility.
The syntax for this command is:
traceroute <host>
host | IP address. |
Example:
Router-N> traceroute 192.168.50.13
session Command
See Session Command on page 44.
137 |
