
Chapter 6 | CLI – Layer 3 |
|
|
Network | Mask | Interface | Cost TTL | Source | |
199.93.0.0 | 255.255.0.0 | 135.64.76.1 | 1 n/a |
show ip route static Command
Use this command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
The IP address of the routes |
|
|
| |||
mask | The ip mask of the routes. |
|
|
| ||
Example: |
|
|
|
|
|
|
|
|
|
| |||
Showing 34 rows |
|
|
|
|
| |
Network | Mask | Interface | Cost Pref Active | |||
10.0.8.0 | 255.255.255.0 | 149.49.36.11 | 1 | high | Yes | |
135.0.0.0 | 255.0.0.0 | 135.64.76.1 | 1 | high | Yes | |
135.64.0.0 | 255.255.0.0 | 135.87.164.1 | 1 | high | No | |
149.49.0.0 | 255.255.0.0 | zevel | 10.10.254.253 | 1 | low | Yes |
149.49.2.0 | 255.255.255.0 | n/a | 1 | high | Yes |
show ip route summary
Use this command to display the number of routes known to the switch.
The syntax for this command is:
show ip route summary
Example:
IP Route Summary:
Current number of routes: 69
140 |