
Chapter 6 | CLI – Layer 3 |
|
|
ip admin-state Command
Use the ip
The syntax for this command is:
ip admin-state <up/down>
up/down | Administrative state of the interface. The choices are |
| up (active) or down (inactive). |
ip netbios-rebroadcast Command
Use the ip
The syntax for this command is:
[no] ip netbios-rebroadcast <mode>
The possible values of mode are:
both | Netbios packets received on the interface |
| rebrodcasted to other interfaces and netbios packets |
| received on other interfaces are rebroadcasted into |
| this interface. |
disable | Netbios packets are not rebroadcasted into or out of |
| this interface. |
Example:
To enable rebroadcasting of netbios packets received by and sent from the interface “marketing”:
Router-N(config-if:marketing)# ip netbios-rebroadcast both
ip directed-broadcast Command
Use the ip
The syntax for this command is:
[no] ip directed-broadcast
154 |