Setting Up the Analyzer

To Connect the Analyzer to a Computer

To Connect the Analyzer to a Point-to-Point

Serial Interface

1 Connect the analyzer to the notebook PC’s serial connector. If this cable is not supplied, use cable p/n 24542U.

2 Connect the analyzer to a mains power outlet.

To Record the System Administration Information

After you have connected the analyzer, switch on the analyzer (see “To Switch the Analyzer On and Off” on page 1-22); then use the system administration functions of the analyzer to set the

system administrator password (see “To Change a Password” on page 4-6)

required users (see User Online Help)

date, time, and time zone (see “To Set the System Date, Time, and Time Zone” on page 4-7)

printer (see User Online Help)

1 Setting Up the Analyzer

1-9

Page 23
Image 23
HP E5200A To Connect the Analyzer to a Point-to-Point Serial Interface, To Record the System Administration Information