HP E5200A manual Captured data, Display the View, Captured Data window, View Captured Data on

Using the Analyzer

To Simulate Traffic

	Select to generate traffic or replay
	captured data.
Display the View
	Display the Simulate Traffic window
Captured Data window
to capture data. See “To	to select the traffic to transmit.
View Captured Data” on
page 2-41.
	Display the Protocol Alarms/ Errors
Display Channel Monitor.	window to simulate AAL or ATM
	errors, or OAM alarms or cell losses.
See “To Monitor a Channel
	See “To Inject Protocol Layer
(VPI/VCI)” on page 2-26.
	Alarms and Errors” on page 2-48.
Select the configuration	Display the Physical Alarms/ Errors
for the port. See “To	window to simulate physical layer
Configure the Analyzer	alarms, errors, or PLCP frameword
and Ports” on page 2-18.	errors. See “To Inject Physical Layer
	Alarms and Errors” on page 2-51.
Turn the laser on or off for
optical interface pods.

Use the Simulate Traffic from Traffic Generator window or the Simulate Traffic from Capture Memory window (shown on the following pages) to simulate and transmit traffic. You display these windows in either of the following ways:

∙From the Simulate menu, select the required port; then select Traffic; then select Traffic Generator or Capture Memory.

∙From the main screen, click the Simulate tab for the required port to display the Simulator; then use the pull-down list to select Traffic Generator or Capture Memory; then click the Traffic icon.

Use Traffic Generator to transmit traffic, such as predefined patterns, Protocol Data Units (PDUs), or sequences. Use Capture Memory to transmit captured data that is currently in the capture memory. At the top of both Simulate Traffic windows are On/Off buttons to turn traffic transmission on and off.

2 Using the Analyzer

2-45