HP E5200A If the Cables Do Not Fit the Sockets, If the Controlling Computer has No Display, If You Cannot Print to the Connected Printer, User’s Guide

Setting Up the Analyzer

To Troubleshoot the Analyzer

If the Controlling Computer has No Display❑Check that the controlling computer power switch is on.❑Check that the power cable is properly connected to the controlling computer.❑Check that the brightness and contrast controls are correctly set.

❑Check that the computer has only the software specified in “Analyzer Software” on page 1-4 loaded. Other software may interfere with the computer configuration. Restore the hard disk by either

∙restoring the backup (see “To Restore Files from Backup Storage Media to a Notebook PC” on page 1-25)

∙using the reset facility (see “To Reset the Notebook PC” on page 1-27)

If You Cannot NFS Mount the Analyzer File System

❑Check that Nfsdw and Inetdw are running on the notebook PC. If they are running, the icons will be displayed on the screen.

If You Cannot Print to the Connected Printer❑Check that the PC-Xware LPD is running on the notebook PC.❑Check that all printer cables are connected correctly.If the Cables Do Not Fit the Sockets❑Check the Box Contents lists to confirm that you have the correct equipment.

❑Check that you are using the correct cables for each connection. Check the part numbers on the cables against the part numbers in the diagrams in this User’s Guide.

the Up Setting 1 Analyzer

1-31