HP E5200A manual To Run SMARTtests and Predefined Macros, Click the Start button

Using the Analyzer

To Run SMARTtests and Predefined Macros

To Run SMARTtests and Predefined Macros

The analyzer provides a number of SMARTtests and predefined macros to help you perform routine tasks.

SMARTtests

Simply select a SMARTtest from the Test pull-down list at the top of the main screen, change any default values you require, and click the Start button. It’s as easy as 1, 2, 3; the analyzer does the rest.

If you are not sure which SMARTtest to run, see the User Online Help. Help is available for all SMARTtests describing what each one does, who should run it, and why and when to run it.

Make sure the analyzer is connected to the system under test, and the port is configured for full duplex mode. Refer to “To Connect to the System Under Test” on page 2-2.

1Select the transmit and receive connection for the SMARTtest.

2Change the default values to run the SMARTtest in the way you want. You can change the criteria and traffic profile; then re-run the SMARTtest any number of times.

3Click the Start button.

2-36