Using the Analyzer
To Inject Alarms and Errors
To Inject Physical Layer Alarms and Errors
The analyzer can generate physical layer alarms and errors, and frameword errors.
Display the Protocol Alarms/Errors window in either of the following ways:
∙From the Simulate menu, select the required port; then select Physical Alarms/Errors.
∙Click the Simulate tab for the required port to display the Simulator; then click the Physical Alarms/Errors button.
To Inject Physical Alarms
1Click the Alarms tab.
2 Click the On button for the alarms you want to inject.
The number of alarms you can select at one time depends on the interface pod installed.
