HP E5200A To Set up the Modem Connection, To Record the System Administration Information, Dialer

Setting Up the Analyzer

To Connect the Analyzer to a Computer

To Set up the Modem Connection

1Double-click the Dialer icon in the Acadia/VxD program group.

Dialer

The Ipswitch, Inc. SLIP/PPP Configure & Dial window is displayed.

2Click the phone number (e5200a) in the Phonebook list; then click the Dial button.

3If required, change the baud rate. To change the baud rate, click the Setup button on the Ipswitch, Inc. SLIP/PPP Configure & Dial window; then select the required baud rate from the Speed pull-down list. The analyzer SLIP baud rate must match this baud rate.

4If required, change the remote phone number. To change the remote phone number, select e5200a from the Phonebook on the Ipswitch, Inc. SLIP/PPP Configure & Dial window, click the Setup button, then type the new phone number in the Phone #: field.

To Record the System Administration Information

1Switch on the analyzer (see “To Switch the Analyzer On and Off” on page 1-22).

2Log in to the analyzer via the SLIP connection using the following user name and password.

Note The HP Broadband Service Analyzer has two sets of default login information:

∙	User Name—boomer	Password—broadband
∙	User Name—root	Password—rootpasswd

See “To Log In to the Analyzer” on page 2-11.

1-18