Avaya P332G-ML Supervisor Level Commands, Username Command, No username Command, No username name

Chapter 5 CLI – Layer 2

Supervisor Level Commands

This level includes all the commands of the User and Privileged Levels (including all show and set commands).

Username Command

Use the username command to add a local user account. You can only do this from within the Supervisor Level.

The syntax for this command is:

username <name> password <passwd> access-type{read-onlyread- writeadmin}

name	New user name
passwd	user’s password
access-type	Access type definition - read only, read-write or
	administrator.

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

No username Command

Use the no username command to remove a local user account.

The syntax for this command is:

no username <name>

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

P332G-ML User’s Guide 125