Avaya manual Avaya P332G-ML Front and Rear Panels, Avaya P332G-ML Front Panel

Chapter 2

Avaya P332G-ML Front and Rear Panels

Avaya P332G-ML Front Panel

The P332G-ML front panel contains LEDs, controls, and connectors. The status LEDs and control buttons provide at-a-glance information.

The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs display information for each port according to the illuminated function LED. The function is selected by pressing the left or right button until the desired parameter LED is illuminated. For example, if the COL LED is illuminated, then all Port LEDs show the collision status of their respective port. If you want to select the LAG function, press the right button until the LAG Function LED is lit. If you then want to select Rx, press the left button several times until the Rx function LED lights.

P332G-ML front panel shown below includes LEDs, buttons, SFP GBIC transceiver housing ports and the RJ-45 console connector (refer to Figure 2.1 and Figure 2.2). The LEDs are described in Table 2.1.

Figure 2.1 Avaya P332G-ML Front Panel

Figure 2.2 Avaya P332G-ML LEDs

P332G-ML User’s Guide 19