Avaya P332G-ML manual Copy module-config tftp filename ip modnum, Copy tftp stack-config Command

Chapter 5 CLI – Layer 2

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

filename	file name (full path)
ip	The ip address of the TFTP server
mod-num	The module number

Example:

P330-N# copy module-config tftp c:\p332ml\switch1.cfg 192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show tftp upload status' command

********************************************************************

*If you are currently running the P330 Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

Copy tftp stack-config Command

Use the copy tftp stack-configcommand to download the stack-level configuration from a saved file into the current NVRAM running configuration, via TFTP. To use this command, you need to have an active tftp server, and to create a file into which to download the data. If Avaya Multi-Service Network Manager is running, an additional tftp server is not required.

Note: You should perform the nvram initialize command prior to the copy tftp operation.

The syntax for this command is:

copy tftp stack-config <filename> <ip>

filename	file name (full path)
ip	The ip address of the TFTP server

P332G-ML User’s Guide 119