Multi-Tech Systems MVP210-SS manual MultiVOIP User Guide QS Phone/IP Starter Config

MultiVOIP User Guide QS: Phone/IP Starter Config.

4.Web Browser GUI Setup (Optional). To do configuration and operation procedures using the web browser GUI, you must first set it up. To do so, follow these steps. (The browser used must be Internet Explorer 6.0 or above; or Netscape 6.0 or above; or FireFox 1.0 or above.)

A. Be sure an IP address has		E. Open web browser.
been assigned to the		(Note: The PC being used must
MultiVOIP unit (this must be		be connected to and have an IP
done in the MultiVOIP		address on the same IP network
Windows GUI).		that the voip is on.)
B. Save Setup in Windows GUI.		F. Browse to IP address of
		MultiVOIP unit.
C. Close the MultiVOIP		G. If username and password
Windows GUI.		have been established, enter
		them when prompted by
		voip.
D. Install Java program from		H. Use web browser GUI to
MultiVOIP product CD.		configure or operate voip.
(Must be Java Runtime
Environment 1.4.2_01 or above.)
NOTE: Required on first use of
Web Browser GUI only.
Need more	See “Web Browser	Interface” in Operation &
info?	Maintenance chapter of User Guide (on CD).

Once you’ve begun using the web browser GUI, you can go back to the MultiVOIP Windows GUI at any time. However, you must log out of the web browser GUI before using the MultiVOIP Windows GUI.

35