Technical Configuration | MultiVOIP User Guide |
|
|
FXS Loop Start Interface: Parameter Definitions (cont’d)
Field Name | Values | Description |
Caller ID fields |
| |
|
|
|
Enable (cont’d) | Y/N | The forms of the ‘Caller Name’ |
|
| and ‘Caller Phone Number’ |
|
| differ depending on the IP |
|
| transmission protocol used |
|
| (H.323, SIP, or SPP) and upon |
|
| entries in the phonebook |
|
| screens of the remote (CID |
|
| generating) voip unit. The CID |
|
| Name and Number appearing |
|
| on the phone at the terminating |
|
| FXS end will come either from a |
|
| central office switch (showing a |
|
| PSTN phone number), or the |
|
| phonebook of the remote (CID |
|
| sending) voip unit. |
The Caller ID feature has dependencies on both the telco central office and the MultiVOIP phone book. See the diagram series after the FXO Parameters section below.