Multi-Tech Systems manual Cabling for MVP210-SS

MultiVOIP User Guide Mechanical Installation & Cabling

2.Connect the power cord supplied with your MultiVOIP to the power connector on the back of the MultiVOIP and to a live AC outlet as shown in Figure 3-11.

Figure 3-11: Cabling for MVP210-SS

3.Connect the MultiVOIP to a PC by using a RJ-45 (male) to DB-9 (female) cable. Plug the RJ-45 end of the cable into the Command port of the MultiVOIP and the other end into the PC serial port. See Figure 3-11.

4.Connect a network cable to the ETHERNET 10/100 connector on the back of the MultiVOIP. Connect the other end of the cable to your network.

5.For an FXS or FXO connection.

(FXS Examples: analog phone, fax machine, Key Telephone System.)

(FXO Examples: PBX extension, POTS line from telco central office.) Connect one end of an RJ-11 phone cord to the Channel 1 FXS/FXO connector on the back of the MultiVOIP.

Connect the other end to the device or phone jack.

75