Technical Configuration | MultiVOIP User Guide |
|
|
Voice/Fax Parameter Definitions (cont’d)
Field Name | Values | Description |
|
|
|
Dynamic | Jitter |
|
|
|
|
Maximum | 60 to 400 | The maximum dynamic jitter buffer |
Jitter Value | ms | of 400 milliseconds is the maximum |
|
| delay tolerable over a high jitter |
|
| network. |
|
| Default = 300 msec |
|
|
|
Optimizat- | 0 to 12 | The Optimization Factor |
ion Factor |
| determines how quickly the length |
|
| of the Dynamic Jitter Buffer is |
|
| changed based on actual jitter |
|
| encountered on the network. |
|
| Selecting the minimum value of 0 |
|
| means low voice delay is desired, |
|
| but increases the possibility of jitter- |
|
| induced voice quality problems. |
|
| Selecting the maximum value of 12 |
|
| means highest voice quality under |
|
| jitter conditions is desired at the |
|
| cost of increased voice delay. |
|
| Default = 7. |
|
|
|
Modem Relay
To place modem traffic onto the voip network (an application called “modem relay”), use Coder G.711
