QS: Connectivity Test | MultiVOIP User Guide |
|
|
7.Make VOIP call. Make call on a local phone line accessing PSTN directly or through key system.
8.Read console messages recorded on HyperTerminal.
Console Messages from Originating VOIP. The voip unit that originates the call will send back messages like that shown below.
[00026975] | CAS[0] : RX : ABCD = 1, 1, 1, 1,Pstn State[1] |
| TimeStamp : 26975 |
[00027190] | CAS[0] : TX : ABCD = 1, 1, 1, 1 |
[00027190] | PSTN: cas seizure detected on 0 |
[00027440] | CAS[0] : TX : ABCD = 0, 0, 0, 0 |
[00033290] | PSTN:call detected on 0 num=17637175662* |
[00033290] H323IF[0]:destAddr = | |
| TA:200.2.10.5:1720,NAME:Mounds |
| View,TEL:17637175662,17637175662 |
[00033290] H323IF[0]:srcAddr = NAME:New | |
| York,TA:200.2.9.20 |
[00033440] | H323IF [0]:cmCallStateProceeding |
[00033500] | H323[0]: Remote Information (Q931): MultiVOIP |
| - T1 |
[00033565] | CAS[0] : TX : ABCD = 1, 1, 1, 1 |
[00033675] | H323IF [0]: MasterSlaveStatus=Slave |
[00033675] | H323IF[0]:FastStart Setup Not Used |
[00033690] | CAS[0] : TX : ABCD = 1, 1, 1, 1 |
[00033755] | H323IF[0]: Coder used 'g7231' |
[00033810] | PSTN:pstn call connected on 0 |
58
