Operation & Maintenance | MultiVOIP User Guide |
|
|
To transfer files using the FTP server functionality in the MultiVOIP, follow these directions.
1.Establish Network Connection and IP Addresses. Both the controller PC and the MultiVOIP unit(s) must be connected to the same IP network. An IP address must be assigned for each.
IP Address of Control PC | ____ . | ____ . | ____ . | ____ |
IP Address of voip unit #1 | ____ . | ____ . | ____ . | ____ |
: | : | : | : | : |
. | . | . | . | . |
IP address of voip unit #n | ____ . | ____ . | ____ . | ____ |
2.Establish User Name and Password. You must establish a user name and (optionally) a password for contacting the voip over the IP network. (When connection is made via a local serial connection between the PC and the voip unit, no user name is needed.)
As shown above, the username and password can be set in the web GUI as well as in the Windows GUI.
