Multi-Tech Systems MVP210-SS manual 111

MultiVOIP User Guide Technical Configuration

7.Set up the Web Browser GUI (Optional). After an IP address for the MultiVOIP unit has been established, you can choose to do any further configuration of the unit (a) by using the MultiVOIP web browser GUI, or (b) by continuing to use the MultiVOIP Windows GUI. If you want to do configuration work using the web browser GUI, you must first set it up. To do so, follow the steps below.

A.Set IP address of MultiVOIP unit using the MultiVOIP Configuration program (the Windows GUI).

B.Save Setup in Windows GUI.

C.Close Windows GUI.

D.Install Java program from MultiVOIP product CD (on first use only).

E.Open web browser.

F.Browse to IP address of MultiVOIP unit.

G.If username and password have been established, enter them when when prompted.

H.Set browser to allow pop-ups. The MultiVOIP Web GUI makes extensive use of pop-up windows to access screens and commands.

I.Use web browser GUI to configure or operate MultiVOIP unit. The configuration screens in the web browser GUI will have the same content as their counterparts in the Windows GUI; only the graphic presentation will be different.

For more details on enabling the MultiVOIP web GUI, see the “Web Browser Interface” section of the Operation & Maintenance chapter of this manual.

111