Multi-Tech Systems MVP210-SS manual Local Configuration Procedure Detailed

MultiVOIP User Guide Technical Configuration

20.Set SIP Server Configuration parameters.

21.Set SIP Server PreDefined Endpoint parameters.

22.View System Info screen and set updating interval (optional).

23.Save the MultiVOIP configuration.

24.Create a User Default Configuration (optional).

When technical configuration is complete, you will need to configure the MultiVOIP’s inbound and outbound phonebooks. This manual has separate chapters describing T1 Phonebook Configuration for North- American-influenced telephony settings and E1 Phonebook Configuration for Euro-influenced telephony settings.

Local Configuration Procedure (Detailed)

You can begin the configuration process as a continuation of the MultiVOIP software installation. You can establish your configuration or modify it at any time by launching the MultiVOIP program from the Windows Start menu.

1.Check Power and Cabling. Be sure the MultiVOIP is turned on and connected to the computer via the MultiVOIP’s Command Port (DB9 connector at computer’s COM port; RJ45 connector at MultiVOIP).

2.Start MultiVOIP Configuration Program. Launch the MultiVOIP program from the Windows Start menu (from the folder location determined during installation).

97