Lexmark CX510DE, 637 manual Using the Push Button Configuration method

Models: CX510 CX510DE 637

1 353
Download 353 pages 25.36 Kb
Page 44
Image 44
Note: Make sure to enter the correct SSID, security method, preshared key or passphrase, network mode, and channel.
4 Click Submit.
5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.
6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.
Click Settings > Network/Ports > Wireless.
Modify the settings to match the settings of your access point (wireless router).
2
3

Additional printer setup

44

Using the Push Button Configuration method

1From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > WiFi Protected Setup > Start Push Button Method

2Follow the instructions on the printer display.

Using the Personal Identification Number (PIN) method

1From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > WiFi Protected Setup > Start PIN Method

2Copy the eightdigit WPS PIN.

3Open a Web browser, and then type the IP address of your access point in the address field.

Notes:

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4Access the WPS settings. For more information, see the documentation that came with your access point.

5Enter the eightdigit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

Your printer is connected temporarily to an Ethernet network.

A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Page 44
Image 44
Lexmark CX510DE, 637 manual Using the Push Button Configuration method, Using the Personal Identification Number PIN method