Maintaining the printer

239

18Close the front door.

19Seal the used developer unit in the bag that the replacement developer unit came in. For more information, see “Recycling Lexmark products” on page 208.

Moving the printer

Before moving the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

Disconnect all cords and cables from the printer before moving it.

Lift the printer off the optional tray, and then set it aside instead of trying to lift the tray and printer at the same time.

Note: Use the handholds located on both sides of the printer to lift it.

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.

Keep the printer in an upright position.

Avoid severe jarring movements.

Page 239
Image 239
Lexmark CX510DE, 637 manual Before moving the printer, Moving the printer to another location