Lexmark 637, CX510DE manual Scanning to an FTP address using a shortcut number

Scanning 118

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Navigate to:

Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup

3Enter the appropriate information.

Note: A password may be required. If you do not have an ID and password, then contact your system support person.

4Enter a shortcut number.

Note: If you enter a number that is already in use, then you are prompted to select another number.

5Click Add.

Creating an FTP shortcut using the printer control panel

1From the home screen, navigate to:

FTP > FTP > type the FTP address > > type a name for the shortcut > Done

2Verify that the shortcut name and number are correct, and then touch OK.

Notes:

•If the name or number is incorrect, then touch Cancel, and then reenter the information.

•If you enter a number that is already in use, then you are prompted to select another number.

Scanning to an FTP address

Scanning to an FTP address using the printer control panel

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the printer control panel, navigate to:

FTP > FTP > type the FTP address > Done > Send It

Scanning to an FTP address using a shortcut number

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.