Lexmark 637, CX510DE manual Utilities menu, Understanding the printer menus 195

Understanding the printer menus		195
	Use	To
	E‑mail to Send Logs	Specify the e‑mail address to which the device sends job accounting logs.
	Log File Prefix	Specify the prefix you want for the log file name.
		Note: The current host name defined in the TCP/IP menu is used as the default log
		file prefix.
Utilities menu
	Use	To
	Remove Held Jobs	Delete confidential and held jobs from the printer hard disk.
	Confidential	Notes:
	Held
		• Selecting a setting affects only print jobs that are resident in the printer.
	Not Restored
		Bookmarks, print jobs on flash drives, and other types of held jobs are not
	All
		affected.
		• Not Restored removes all Print and Hold jobs that are not restored from the
		printer hard disk or memory.
	Format Flash	Format the flash memory.
	Yes	Warning—Potential Damage: Do not turn off the printer while the flash memory is
	No	being formatted.
		Notes:
		• Yes deletes all data stored in flash memory.
		• No cancels the format request.
		• Flash memory refers to the memory added by installing a flash memory card in
		the printer.
		• The flash memory option card must not be read/write‑ or write‑protected.
		• This menu item appears only when a non‑defective flash memory card is
		installed.
	Delete Downloads on Disk	Delete downloads from the printer hard disk, including all held jobs, buffered jobs,
	Delete Now	and parked jobs.
	Do Not Delete	Notes:
		• Delete Now sets the printer to delete the downloads and allows the display to
		return to the originating screen after the deletion.
		• Do Not Delete sets the printer display to return to the main Utilities menu for
		touch‑screen printer models. When selected in non‑touch‑screen printer
		models, Do Not Delete sets the printer to return to the originating screen after
		the deletion.
	Activate Hex Trace	Assist in isolating the source of a print job problem.
		Notes:
		• When activated, all data sent to the printer is printed in hexadecimal and
		character representation, and control codes are not executed.
		• To exit or deactivate Hex Trace, turn off or reset the printer.