Lexmark 637, CX510DE manual Smtp Setup menu, Understanding the printer menus 144

Understanding the printer menus		144
	Use	To
	USB Buffer	Set the size of the USB input buffer.
	Disabled	Notes:
	Auto
		• Auto is the factory default setting.
	3K to [maximum size allowed]
		• Disabled turns off job buffering.
		• The USB buffer size value can be changed in 1-KB increments.
		• The maximum size allowed depends on the amount of memory in the printer,
		the size of the other link buffers, and whether Resource Save is set to On or
		Off.
		• To increase the maximum size range for USB Buffer, disable or reduce the size
		of the parallel, serial, and network buffers.
		• The printer automatically restarts when the setting is changed from the printer
		control panel. The menu selection is then updated.
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
SMTP Setup menu
	Use		To
	Primary SMTP Gateway		Specify SMTP server gateway and port information.
			Note: 25 is the default SMTP gateway port.
	Primary SMTP Gateway Port
	Secondary SMTP Gateway
	Secondary SMTP Gateway Port
	SMTP Timeout		Specify the amount of time in seconds before the server stops trying to
	5–30		send an e‑mail.
			Note: 30 is the factory default setting.
	Reply Address		Specify a reply address of up to 128 characters in the e-mail sent by the
			printer.