Lexmark 637, CX510DE manual Understanding the printer menus 163

Understanding the printer menus		163
	Use	To
	Color Dropout	Specify which color to drop during scanning and to adjust the dropout setting for
	Color Dropout	each color threshold.
	None	Notes:
	Red	• None is the factory default setting for Color Dropout.
	Green
		• 128 is the factory default setting for each color threshold.
	Blue
	Default Red Threshold
	0–255
	Default Green Threshold
	0–255
	Default Blue Threshold
	0–255
	Contrast	Specify the contrast used for the copy job.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a copy.
	‑4 to 4	Note: 0 is the factory default setting.
	Adjust ADF Skew	Correct the slight skew in the scanned image.
	Auto	Note: Auto is the factory default setting.
	Off
	On
	Scan edge to edge	Allow edge-to-edge scanning of the original document.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a copy.
	1–5	Note: 3 is the factory default setting.
	Temperature	Specify “warm” or “cool” outputs.
	‑4 to 4	Notes:
		• 0 is the factory default setting.
		• "Cool” values generate a bluer output than the default while “warm” values
		generate a redder output than the default.
	Sample Copy	Create a sample copy of the original document.
	Off	Note: Off is the factory default setting.
	On