Lexmark 637, CX510DE manual Security Audit Log menu, Understanding the printer menus 148

Understanding the printer menus		148
	Use	To
	Automatic Method	Mark all disk space used by a previous print job. This method does not permit the file
	Single pass	system to reuse this space until it has been cleared.
	Multiple pass	Notes:
		• “Single pass” is the factory default setting.
		• Only automatic wiping enables users to erase temporary data files without
		having to turn off the printer for an extended amount of time.
		• Highly confidential information should be erased using only the Multiple pass
		method.
Security Audit Log menu
	Use	To
	Export Log	Enable an authorized user to export the security log.
		Notes:
		• To export the log from the printer control panel, attach a flash drive to the
		printer.
		• To export the log from the Embedded Web Server, download the log to a
		computer.
	Delete Log	Specify whether audit logs are deleted.
	Yes
	No
	Configure Log	Specify how audit logs are configured.
	Enable Audit	Notes:
	Yes
		• Enable Audit determines if events are recorded in the secure audit log and
	No
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Server determines the value used to send logs to the remote
	Remote Syslog Server
		syslog server.
	[256 character string]
		• Remote Syslog Port identifies the port over which the printer transmits logged
	Remote Syslog Port
		events to a remote server.
	1–65535
		• Remote Syslog Method identifies the protocol used by the printer to transmit
	Remote Syslog Method
		logged events to a remote server. Normal UDP is the factory default setting.
	Normal UDP
		• Remote Syslog Facility determines the Facility value that the printer uses when
	Stunnel
		sending events to the remote syslog server. 4 is the factory default setting.
	Remote Syslog Facility
		• “Log full behavior” determines how the printer resolves if the log entirely fills
	0–23
		its allotted memory. “Wrap over oldest entries” is the factory default setting.
	Log full behavior
	Wrap over oldest entries
	E‑mail log then delete all
	entries