MartinLogan 12, 10 user manual Specifications

Specifications*	MARTINLOGAN MOTION 10
Frequency Response	65–25,000 Hz ± 3 dB
Dispersion	80° x 80°
Sensitivity	90 dB @ 2.83 volts/ meter
Impedance	4 Ohms. Compatible with 4, 6
	or 8 Ohm rated amplifiers.
Crossover Frequency	3,000 Hz
High Frequency Driver	1” x 1.4” (2.6cm x 3.6cm)
	Folded Motion Transducer with
	5.25” x 1.75” (13.3cm x
	4.4cm) diaphragm.
Mid Frequency Driver	. . . . . . . . . . . . . . . . . . . . .

MARTINLOGAN MOTION 12

40–25,000 Hz ± 3 dB

80° x 80°

92 dB @ 2.83 volts/ meter

4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers.

300 & 3,000 Hz

1” x 1.4” (2.6cm x 3.6cm) Folded Motion Transducer with 5.25” x 1.75” (13.3cm x 4.4cm) diaphragm.

5.25” (13.3cm) paper cone with cast aluminum basket. Open back dipole.

Low Frequency Drivers	Two 5.25” (13.3cm) paper
	cone with cast aluminum basket.
	Non-resonant asymmetrical
	chamber format.
Cabinet	Ported
Components	Custom air core coil and low DCR
	steel laminate inductors. Polyester
	film capacitors in series and low DF
	electrolytic capacitors in parallel.
	Tweeter thermal/current protection.
Recommended Amp Power . . .	20–200 watts
Binding Post Inputs	Push style with banana jacks
Weight	22 lbs. (10 kg)
Dimensions (HxWxD)	35.1” x 9.9” x 10”
	(89.1cm x 25.1cm x 25.4cm)

Two 6.5” (16.5cm) paper cone with cast aluminum basket. Non- resonant asymmetrical chamber format.

Ported with dipole mid-range.

Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection.

20–300 watts

Push style with banana jacks

36 lbs. (16.3 kg)

42.8” x 7” x 14.1” (108.7cm x 17.8cm x 35.8cm)

*Specifications are subject to change without notice.

8