ENGLISH
Machine lacks power
The saw blade is blunt and worn (possi- bly has heat marks from overheating):
The saw blade you use is not suitable for the material you are cutting (see chapter 15, "Technical Specifications", and install a proper saw blade);
Saw blade warped
xReplace the saw blade as described in chapter 9.1.
Saw vibrates heavily
Saw blade warped
xReplace the saw blade as described in chapter 9.1.
Saw blade incorrectly mounted:
xRemove the saw blade and then mount it again correctly by following the steps outlined in chapter 9.1.
Saw squeals when starting
The drive belt is loose:
xCheck, tighten or, if necessary, replace the drive belt as outlined in chapter 9.2.
Rotating table does not move at all or is hard to turn
Saw dust has built up under the rotating table:
xRemove the saw dust as outlined in chapter 9.7.
15. Technical Specifications
Voltage | V | 120 V (1~ 60 Hz) | ||
|
|
|
| |
Current draw | amp | 15 |
| |
|
|
|
| |
Fuse protection | amp | 20 |
| |
|
|
|
| |
Protection class | IP | 20 |
| |
|
|
|
| |
Degree of protection |
| II |
| |
|
|
| ||
Saw blade speed | rpm | 5200 | ||
|
|
| ||
Cutting speed | fpm | 13345 | ||
|
|
|
| |
Saw blade diameter (outer) | in. | 10 |
| |
|
|
|
| |
Arbor bore | in. | 5/8 |
| |
|
|
|
| |
Dimensions |
|
|
| |
Machine in shipping carton |
|
|
| |
length / width / height | in. | 31 | 1/2 x 23 1/2 x 18 1/2 | |
Machine ready to work, rotating table in 90° position, c/w suction port |
|
|
| |
length / width / height | in. | 22 | 3/4 x 34 3/4 x 23 1/2 | |
|
|
|
| |
Maximum work piece cross section |
|
|
| |
Standard cross cuts |
|
|
| |
width / height | in. | 11 | 7/32 x 3 3/16 | |
Miter cuts (rotating table 45°) |
|
|
| |
width / height | in. | 7 7/8 x 3 3/16 | ||
Bevel cuts (track arm holder 45° left) |
|
|
| |
width / height | in. | 11 | 7/32 x 2 1/8 | |
Compound miter cuts (rotating table 45° / track arm holder 45 ° left) |
|
|
| |
width / height | in. | 7 7/8 x 2 1/8 | ||
|
|
|
| |
Weight |
|
|
| |
Machine in packing | lbs | 57.3 | ||
Machine ready to work | lbs | 44 |
| |
|
|
| ||
Permissible ambient temperature for operation | °F | 32 to 104 | ||
Permissible temperature for transport and storage | °F | 32 to 104 | ||
|
|
|
| |
Noise emission according to EN ISO 3744 |
|
|
| |
Sound power level LWA | dB (A) | 118 | ||
sound pressure level at operator ear LPA | dB (A) | 104 | ||
Effective value of weighted acceleration | ft/s2 |
|
| |
(Vibration at handle) | < 8.2 | |||
Dust collector (not included in standard delivery) |
|
|
| |
Suction port diameter | in. | 1 1/2 | ||
Minimum air volume flow | cfm | 323 | ||
Minimum vacuum at suction port | psi | 0.107 | ||
Minimum air speed at suction port | fpm | 3937 | ||
|
|
|
|
|
22
