Extron electronic MTP manual Specifications, Part Numbers, and Accessories, Video input, Sync

Specifications, Part Numbers, and Accessories

Specifications

Video

Gain	Unity
Differential phase error	<1.0º at 3.58 MHz and 4.43 MHz
Differential gain error	<1.0% at 3.58 MHz and 4.43 MHz

Video input

Number/signal type
MTP T CV/AV Series	1 composite video
MTP T SV Series	1 S-video
MTP R CV/AV/SV Series	1 set of proprietary analog signals
Connectors
MTP T CV/AV Series	1 female BNC
MTP T AV AAP	1 female RCA
MTP T SV Series	1 female 4-pin mini DIN
MTP R CV/AV/SV Series	1 female RJ-45
Nominal level	1 Vp-p for Y of S-video and for composite
	video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 V to 1.5 Vp-p with no offset
Impedance	75 ohms
Return loss	<-30 dB @ 10 MHz
DC offset (max. allowable)	100 mV

Video output

Number/signal type

MTP T CV/AV/SV Series and MTP T AAP Series

	1 set of proprietary analog signals
MTP R CV/AV Series	1 composite video
MTP R SV Series	1 S-video
Connectors
MTP T CV/AV/SV Series	1 female RJ-45
MTP T AAP Series	1 female RJ-45 on a 3” (7.6 cm) pigtail
MTP R CV/AV Series	1 female BNC
MTP R SV Series	(1) 4-pin mini DIN
Nominal level	1 V p-p for Y of S-video and for composite
	video
	0.3 V p-p for C of S-video
Minimum/maximum levels	0.3 V to 1.5 Vp-p
Impedance	75 ohms

Return loss	<-35 dB @ 5 MHz
DC offset	±20 mV with input at 0 offset

Sync

Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio — audio models (A, AV, SVA models) only

Gain
RCA models	Unbalanced output: 0 dB (unity)
All other models	Unbalanced output: 0 dB (unity); balanced
	output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.48 dB
THD + Noise	0.08% @ 1 kHz, 0.3% @ 20 kHz at nominal
	level
S/N
RCA models	>90 dB, at maximum output (unweighted)
All other models w/audio >80 dB, balanced at maximum output
	(unweighted)
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>75 dB @ 1 kHz
CMRR	>34 dB @ 20 Hz to 20 kHz

Audio input — audio models (A, AV, SVA models) only

Number/signal type
MTP T AV, MTP T SV A .	1 stereo, balanced/unbalanced
MTP T AV/SV A RCA, MTP T AAP
	1 stereo, unbalanced
MTP R Series	1 set of proprietary analog signals
Connectors
MTP T AV, MTP T SV A . (1) 3.5 mm captive screw connector, 5 pole
MTP T AV/SV A RCA, MTP T AAP
	1 pair of RCA female
MTP R Series	1 female RJ-45 (shielded)
Impedance	>5.6k ohms ±5% unbalanced, >10k ohms
	±5% balanced
Nominal level	-10 dBV (0.32 Vrms)
Maximum level	>+2.4 dBu (balanced or unbalanced) at
	1%THD+N

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu.

A-2 VersaTools® MTP Series • Reference Information VersaTools® MTP Series • Reference Information A-3