Extron electronic MTP manual Specifications, Part Numbers, Accessories, cont’d, General

Specifications, Part Numbers, Accessories, cont’d

Audio output — audio models (A, AV,

SVA models) only

Number/signal type
MTP T Series (all models)	1 set of proprietary analog signals
MTP R AV, MTP R SV A	1 stereo or dual mono, balanced/
	unbalanced
MTP R AV/SV A RCA ....	1 stereo or dual mono, unbalanced
Connectors
MTP T Series	1 female RJ-45 (shielded)
MTP T AAP Series	1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP R AV, MTP R SV A (1) 3.5 mm captive screw connector, 5 pole
MTP R AV/SV A RCA ....	1 pair of RCA female
Impedance
MTP R AV, MTP R SV A	50 ohms unbalanced, 100 ohms balanced
MTP R AV/SV A RCA ....	50 ohms unbalanced
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)	>+3.3 dBu, balanced or unbalanced at
	1%THD+N
Maximum level (600 ohm)	>+2.0 dBm, balanced or unbalanced at
	1%THD+N

General

External power supply	100 VAC to 240 VAC, 50/60 Hz, external,
	autoswitchable; to 12 VDC, 2.0 A,
	regulated
Power input requirements	12 VDC, 0.2 A (max.) with no load;
	0.45 A (max.) with full load

If the distance between the transmitter and receiver is less than 500' (150 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/ receiver pair. If the distance between transmitter and receiver is greater than 500' (150 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device.

Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) /
	10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) /
	10% to 90%, noncondensing
Cooling	Convection, unvented,

Rack mount
MTP T AAP Series	Yes, with optional rack panel, or furniture-
	/wall-mountable with optional AAP
	mounting plates
All other models	Yes, with optional 1U, 9.5" deep rack shelf,
	part #60-190-01 or 60-604-01; or
	VersaTools® 1U, 3" deep rack shelf, part
	#60-190-20 or 60-604-20. Also furniture-
	mountable with optional brackets.
Enclosure type	Metal
Enclosure dimensions (Depths exclude connectors and cables.)
MTP T AAP Series
Faceplate	1.4" H x 3.5" W x 0.1" D
	(3.6 cm H x 8.9 cm W x 0.3 cm D)
	(double space AAP plate)
Transmitter	1.35" H x 2.7" W x 1.3" D
	(3.4 cm H x 6.9 cm W x 3.3 cm D)
All other models	1.7" H x 2.2" W x 3.0" D
	(1U high, one-eighth rack wide)
	4.2 cm H x 5.6 cm W x 7.6 cm D
Product weight	1.0 lbs (0.5 kg)
Shipping weight	3 lbs (2 kg)
Vibration	ISTA 1A in carton
	(International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF	30,000 hours
Warranty	3 years parts and labor

All nominal levels are at ±10%.

Specifications are subject to change without notice.

A-4 VersaTools® MTP Series • Reference Information VersaTools® MTP Series • Reference Information A-5