Chapter 5 Specifications
LTO Cartridge Specifications
Mean Time to | The mean time to replace (MTTR) is the average time required by a |
Replace | qualified service technician to diagnose a defective drive and to install a |
| replacement drive. The MTTR for LTO products is less than 0.5 hour (30 |
| minutes). |
| The Quantum LTO drives are |
| with a subassembly or component in the drive, you should replace the |
| entire unit. Return the drive to the factory in its original packaging. |
| Contact your distributor, dealer, your computer system company or your |
| Quantum sales representative to arrange the return. |
LTO Cartridge Specifications
Environmental Considerations
Table 10 Environmental Tolerances
Table 10 lists the basic environmental tolerances for LTO Ultrium cartridges.
Specification | Value |
|
|
Operating temperature | 10°C to 40°C |
|
|
Relative humidity | 20% to 80% |
|
|
Wet bulb temperature | 26° C max |
|
|
Max localized | > 52°C |
|
|
If during storage and/or transportation a cartridge has been exposed to conditions outside the above values, it must be conditioned before use in the operating environment. The conditioning shall be exposure to the operating environment for a time equal to, or greater than, the time away from the operating environment, up to a maximum of 24 hours. There shall be no deposit of moisture anywhere on or in the cartridge.
The stray magnetic field at any point on the tape shall not exceed 4000 A/m.
44 |
|
