Chapter 6 UNIX Settings

Configuring for HP-UX 11.0

M TCAN_COMPRESS,

40, 5*60, 10*60, 10*60, 3*3600, 512, 256*512,

tpsc_default_dens_count, tpsc_defalt_hwg_dens_names, tpsc_default_alias_dens_names, {0}, 0, 0, 0, 0, (u_char*) 0},

After modifying the configuration file, recompile the kernel with the autoconfig command and reboot the system. If you are replacing an existing storage device with the same SCSI ID remove the device files prior to using the autoconfig command and rebooting the system.

Configuring for HP-UX 11.0

Finding Current

To find currently installed SCSI controllers and devices, use the

Hardware/Driver

command can ioscan–f. This command lists all the system devices and

Configuration

their device names.

Attaching the LTO- Choose a SCSI address that does not conflict with any already attached 2 Half-Height Tape SCSI devices on your SCSI controller. Figure 2 on page 9 for jumper

Driveinstallation for the LTO-2 Half-Height Tape Drive. Attach the LTO-2 Half-Height Tape Drive and apply power to the drive(s) and the host system. After the boot process completes and you log in as superuser, issue the command:

ioscan –C tape –f.

You should see output similar to:

Class I H/WPath Driver S/WState H/Wtype Description

Tape 7 8/12.6.0 stape Claimed Device CERTANCE ULTRIUM 2

From the root directory and as superuser, issue the command:

/sbin/insf –C tape.

Then issue the command:

/sbin/mksf –d stape –H x/x.x.x –I y –c 1 –n –u /dev/rmt/zcnb

LTO-2 Half-Height Tape Drive User’s Guide

61

Page 75
Image 75
Quantum LTO-2 manual Configuring for HP-UX, Hardware/Driver, Configuration