Quantum LTO-2 manual Power Specifications, Specification +12 VDC + 5VDC

Chapter 5 Specifications

Power Specifications

Power Specifications

Table 5 Voltage and Current

Table 6 Power

Dissipation

The desktop LTO-2 Half-Height Tape Drive comes with a built-in 90- 260VAC (47-63 Hz) automatic switching power supply.

Maximum voltage and power specifications for the internal LTO-2 Half-Height Tape Drive are listed in table 5 and table 6.

Specification	+12 VDC	+ 5VDC
DC Voltage Tolerance (1)	12.00 + or – 10%	5.00 + or – 5%
Non-operating max voltage	14 Volts peak	7 Volts peak
Idle current (1)	0.13 amps RMS	1.4 amps RMS
Standby current (max) (2)	0.45 amps RMS	1.4 amps RMS*
Typical operating current (3)	0.71 amps RMS	2.9 amps RMS
Max operating current (4)	0.83 amps RMS	3.0 amps max RMS
Max. Peak operating	2.34 amps	3.0 amps max RMS
current (5)	(1 sec max)
Ripple (peak-to-peak)	< 100 mV	< 100 mV

*RMS parameters measured at the power connector using a true RMS digital meter.

Specification	LTO-2
Idle Power (1)	9 watts RMS
Standby Power (2)	12.5 watts RMS*
Typical Operating Power (3)	23 watts RMS

38 LTO-2 Half-Height Tape Drive User’s Guide