53 E, NDimensional Drawings Specifications | Sharp PN-E702, PNE702

nDimensional Drawings

Note that the values shown are approximate values.

Specifications

3-15/16

[100]

31-11/16

[76.5] [43.5]

37-5/16 [947]

59-9/16 [1513]

63-9/16 [1615]

1-15/16 [50]

Opening width (60-13/16 [1545])

Opening height (34-1/4 [870])

VESA holes *

Unit: inch [mm]

7-7/8 7-7/8

[200][200]

3-15/16 3-15/16

[100] [100]

7-7/8 [200]

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws.

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch

(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

nPower management

This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor’s power management function to work.

DPMS: Display Power Management Signaling

DMPM: Digital Monitor Power Management

DPMS	Screen	Power	Hsync	Vsync
DPMS	Screen	consumption	Hsync	Vsync

ON STATE	Display	235 W*1	Yes	Yes
STANDBY	No		No	Yes
		1.0 W12
SUSPEND		1.0 W12	Yes	No
	display
OFF STATE	display		No	No
OFF STATE			No	No

	DMPM	Screen	Power
	DMPM	Screen	consumption
			consumption

	Monitor ON	Display	235 W*1
	Active OFF	No display	1.0 W12

*1 When PN-ZB01 (optional) is not connected.

*2 When AUTO INPUT CHANGE is set to OFF.

nDDC (plug and play)

The monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters

is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect

plug-and-play monitors.

There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

53 E

Image 53

Sharp PN-E702, PNE702 operation manual 53 E, NDimensional Drawings Specifications, NPower management, NDDC plug and play

Contents

PN-E702 GREEN-AND-YELLOW For Customers in U.KBlue Brown Important Information Refer Servicing to Qualified Service Personnel Information on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EU Dear Sharp Customer Safety Precautions Tips and Safety Instructions Do not place the monitor on a device which generates heat For the monitor in landscape orientationFor the monitor in portrait orientation Supplied Components Contents NRear view Part NamesNFront view Signal transmitter NRemote control unit Part NamesPower button See Mute button See 11 E Connection with a PC or AV equipment Connecting Peripheral Equipment 13 E Connecting Peripheral Equipment Binding Cables Connecting the Power CordRemoving the Handles Handles can be removed Installing the batteries Preparing the Remote Control UnitRemote control operation range 15 E Turning on the main power Turning Power On/OffTurning power on/off Main power switch NOperation mode Disabling power on/off operationsNDate/time setting Turning Power On/Off Mute Basic OperationMenu Display 19 E Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by Dot Displaying the menu screen Menu ItemsNExample of operation NMenu screen display Menu item details 21 ENSCREEN Menu Items NPICTURE NAUDIO NSETUPMenu Items NOPTION 23 E NMULTI Menu Items NDual screen display 25 ENPIP/PbyP Setting procedure NZOOM2 Special SettingSet using the Multi menu Menu Items NEnlarge 27 E PowerNSCHEDULE DAY of the Week NScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 29 E Controlling the Monitor with a PC RS-232C Communication procedurePC connection Communication conditions NID numbers 31 ENResponse code format VOLM0030 002VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 33 E Setting of the Gamma user data Power control/Input mode selection RS-232C command tableHow to read the command table Command Command field See Direction Controlling the Monitor with a PC RS-232C Screen menu 35 E Controlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Audio menu Setup menu37 E Controlling the Monitor with a PC RS-232C Option menu 39 E Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientation Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user data41 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 43 E Default Gateway 0.0To set from a PC Controlling the Monitor with a PC LAN Controlling with a PC See pages 45 to 49 for details on each settingBasic operation If the Dhcp Client is set to OFF, specify an IP address Information about this monitor appears Standby mode, Power on is the operation available45 E If the Dhcp Client is set to OFF, specify the subnet mask User Name / PasswordDNS Server Accept IP Address 47 E Recipient E-MAIL Addresses Attach the log file to a TEMPERATURE/HARDWARE error e-mailCondition Confirmation 49 E Troubleshooting 51 E Troubleshooting NProduct Specifications Specifications NPower management NDimensional Drawings Specifications53 E NDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC 55 E Mounting Precautions For Sharp dealers and service engineers PN-E702 Me EN11K1