■ NETWORK (GENERAL)
This screen allows you to specify the general LAN settings.
MONITOR NAME
Specify a name for this monitor as it should appear on the Internet Explorer screen.
AUTO LOGOUT TIME
Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
Specify in minutes from 1 to 65535. A value of ‘0’ will disable this function.
DATA PORT
Specify the TCP port number to use for exchanging data with the monitor.
Specify a value from 1025 to 65535.
SEARCH PORT
Specify the port number to use when searching for this monitor.
Specify a value from 1025 to 65535.
INSTALLATION INFORMATION (NAME/LOCATION)
Specify the information to display for this monitor in the Internet Explorer window.
TIPS
•The MONITOR NAME can be up to 16 alphanumeric characters or symbols.
•Enter up to 50 characters in the NAME field in the
INSTALLATION INFORMATION.
•Enter up to 100 characters in the LOCATION field in the
INSTALLATION INFORMATION.
Controlling the Monitor with a PC (LAN)
■ MAIL (ORIGINATOR)
This screen allows you to configure the
The settings depend on the configuration of your LAN. Ask your LAN administrator for details.
SMTP SERVER
Specify the SMTP server address for sending
*When using a domain name, make sure to specify the DNS server as well. (See page 46.)
ORIGINATOR E-MAIL ADDRESS
Specify the
This address becomes the
ORIGINATOR NAME
Specify the name for the originator.
This name appears in the “Originator Name” field of the
AUTHENTICATION
Specify the authentication method to use when sending
POP SERVER
If the “AUTHENTICATION” method is “POP before SMTP”, specify the POP server address.
ACCOUNT NAME / PASSWORD
If the “AUTHENTICATION” method is “POP before SMTP”, specify the account name and password to connect to the POP server.
TIPS
•You can enter up to 64 alphanumeric characters or symbols for the ORIGINATOR
•The SMTP SERVER and POP SERVER can be up to 64 characters.
The following characters can be used:
