Sharp PNE702, PN-E702 operation manual Basic Operation, Mute, Menu, Display

Basic Operation

2

5

1

3

4

2. MUTE

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the previous level.

3. MENU

Displays and turns off the menu screen. (see page 20.)

4. VOL +/- (Volume adjustment)

Pressing or displays the VOLUME menu when the menu screen is not displayed.

V O L U M E 15

7 6

8

1. INPUT (Input mode selection)

The menu is displayed. Press or to select the input

mode, and press to enter.

*You can select the input terminal by pressing the input switch of the monitor.

Input mode	Video	Audio
PC D-SUB	PC D-sub input terminal*1	Audio input terminal
PC HDMI	PC/AV HDMI input terminal*2	*3
AV HDMI	PC/AV HDMI input terminal*2
AV COMPONENT	PC D-sub input terminal*1	Audio input terminal
AV VIDEO	PC D-sub input terminal*1

When the PN-ZB01 (optional) is attached

Input mode	Video	Audio
PC DVI-D	PC/AV DVI-D input terminal*4
PC HDMI	PC/AV HDMI input terminal*2
PC D-SUB	PC D-sub input terminal*1
PC RGB	PC RGB input terminals*5
AV DVI-D	PC/AV DVI-D input terminal*4
AV HDMI	PC/AV HDMI input terminal*2	*3
	AV COMPONENT input
AV COMPONENT	terminals*5
	PC D-sub input terminal*1
AV S-VIDEO	AV S-video input terminal
AV VIDEO	AV video input terminal
	PC D-sub input terminal*1

*1 Select the terminal to be used in D-SUB of INPUT SELECT. (See page 23.)

*2 Select the terminal to be used in HDMI of INPUT SELECT. (See page 23.)

*3 Select the terminal for AUDIO SELECT which is used for audio input. (See page 23.)

*4 Select the terminal to be used in DVI of INPUT SELECT. (See page 23.)

*5 Select the terminal to be used in BNC of INPUT SELECT. (See page 23.)

Press or to adjust the volume of the sound.

*If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears.

5. BRIGHT +/- (Backlight adjustment)

Pressing or displays the BRIGHT menu when the menu screen is not displayed.

B R I G H T 15

Press or to adjust the brightness.

*If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.

6.SIZE (Screen size selection) The menu is displayed.

Press or to select the screen size. (See page 19.)

7.DISPLAY

Displays monitor information. When you press this button again, the display disappears.

When the PN-ZB01 (optional) is attached, the display changes from INFORMATION1 → INFORMATION2 → clear display, and so on every time you press this button.

•The display disappears automatically after about 15 seconds.

•LAN is displayed during LAN communication.

•If LAN is displayed in red, there is a duplicate IP address.

8. MODE (Color mode selection)

Each time you press this button, the color mode changes in the following order:

STD (Standard) → VIVID → sRGB →

HIGH ILLUMINANCE → STD...

•HIGH ILLUMINANCE is a display with colors suited to bright locations.

•sRGB applies to PC input only.

sRGB is international standard of color representation specified by IEC (International Electrotechnical

Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to its original image.

E18