AWARNING
ξMinimize the amount of wood dust escaping from the machine and the job site:
Remove dust deposits from the work area. DO NOT BLOW THE DUST AWAY WITH COM- PRESSED AIR BECAUSE THIS WILL ONLY SPREAD THE DUST RATHER THAN REMOV- ING IT.
Make sure the dust collector is leak free and repair any leaks immediately.
Keep your work area well venti- lated at all times.
Modification of the machine and use of
ADANGER
ξUnauthorized changes and/or mod- ifications affect machine safety and are not allowed. The manufacturer disclaims any liability for any dam- age or injuries resulting from changes or modifications or from the use of
AWARNING
ξFollow all instructions given in this manual strictly when you assem- ble and start up the machine.
Defects and malfunctions
ADANGER
ξKeep the machine and all accesso- ries in good, clean and safe work- ing condition. Strictly observe all maintenance instructions contained in this manual.
ξBefore every use of this machine check for possible damage. Every time you want to use the machine make sure that all safety devices and protective guards are undam- aged and fully operational.
ξCheck that all moving parts operate smoothly and without jamming.
ξMake sure that all parts and acces- sories are properly installed and safely secured to ensure the safe and
ADANGER
ξAny damaged parts or protection devices must be replaced by fully qualified and factory authorized personnel only.
ξDamaged switches may only be replaced at a factory authorized service center. For information on the service center nearest you, refer to the information contained in "Warranty Terms and Conditions" at the beginning of this manual.
ξNEVER OPERATE THE MACHINE IF THE ON/OFF SWITCH IS DAM- AGED!
ξIf the machine is not working prop- erly, mark or tag it accordingly and then move it to a safe place where it cannot be used inadvertently, or by unauthorized persons or any children.
Noise
AWARNING
ξPrevent hearing loss! Use ear pro- tection. Always wear ANSI approved ear protection such as ear plugs or ear muffs.
Contamination upon contact
AWARNING
ξThe insulation of power cords may contain substances that are known or suspected to cause cancer, damage to reproductive organs and/or the ability to procreate, and/ or may cause damage to fetuses and unborn children.
Wash your hands thoroughly with soap and water every time after touching the power cord.
Grounding and insulation
ADANGER
ξFully insulated machines have a special plug. Consult an electrician if you do not have a matching out- let.
ξDo not tamper with the plug or the outlet yourself. Consult a qualified electrician for assistance.
ENGLISH
3.3 Specific Safety Instruc- tions
ADANGER
ξWhen using this machine, observe the following safety instructions to avoid the risk of personal injury or property damage.
Lack of experience and expertise with compound miter saws
AWARNING
ξPAY ATTENTION TO AND FOL- LOW, WHERE APPLICABLE, ALL SAFETY RULES AND REGULA- TIONS, REGULATIONS FOR
ACCIDENT PREVENTION, OCCUPATIONAL SAFETY AND
HEALTH ADMINISTRATION (OSHA) RULES AND REGULA- TIONS, ENVIRONMENTAL AND ALL OTHER FEDERAL, STATE AND LOCAL LAWS IN EFFECT AT THE OPERATION SITE, AS THEY APPLY TO MITER SAWS.
ξThis machine shall only be oper- ated by persons familiar with miter saws, their operation and the spe- cific risks associated with the oper- ation of miter saws.
ξContact your supervisor, instructor or any other qualified individual in case you lack substantial experi- ence and expertise regarding the operation of miter saws.
Personal injury inflicted by track arm holder and sawhead assembly
AWARNING
ξHold the handle firmly when you start the cutting operation. The risk of the sawhead being kicked up is particularly high at the moment when the saw blade makes its first contact with the work piece.
ξIf you tilt the sawhead assembly to the side, hold it at the handle and keep your fingers away from the track arm holder and out of its tilt- ing range.
ξAvoid lateral pressure on the saw- head when making grooves. Use clamps to firmly position your work piece and secure it against acci- dental movement.
9
