Operator's Manual | Third Edition • Second Printing |
|
|
|
|
SAFETY RULES
Do not alter or disable machine components that in any way affect safety and stability.
Do not modify or alter an aerial work platform without prior written permission from the manufacturer. Mounting attachments for holding tools or other materials onto the platform, toeboards or guard rail system can increase the weight in the platform and the surface area of the platform or the load.
Do not raise the platform when wind speeds may exceed 12.5 m/s.If wind speeds exceed 12.5 m/s when the platform is raised, lower the platform and do not continue to operate the machine.
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
Do not drive the machine on or near uneven terrain, unstable surfaces or other hazardous conditions with the platform raised.
Do not replace items critical to machine stability with items of different weight or specification.
Do not place or attach fixed or overhanging loads to any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled by person(s) in the platform.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition, castle nuts are properly tightened and cotter pins are properly installed.
Do not use batteries that weigh less than the original equipment. Batteries are used as counterweight and are critical to machine stability. Each battery must weigh 29.5 kg.
Do not use the machine as a crane.
Do not push the machine or other objects with the platform.
Do not contact adjacent structures with the platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
Do not operate the machine with the chassis trays open.
4 | Part No.1000032 |
